Vortex Optics VMX3 MAGNIFIER - VMX3 COMBO - Manual (Page 4)

6 7
Maintenance
The VMX3 magnifier will require very little routine
maintenance other than periodically cleaning the exterior
lenses. Be sure to blow away any dust or grit on the lenses
prior to wiping the surfaces. Using your breath, or a very
small amount of water or pure alcohol, can help remove
stubborn things like dried water spots.
When cleaning the lenses, be sure to use products that are
specifically designed for use on coated optical lenses such as
the Vortex Lens Pen and FogFree Cleaning Kits.
If desired, the magnifier’s exterior may be cleaned by
wiping with a soft, dry cloth.
Cleaning
All components of the VMX3 are permanently lubricated, so
no additional lubricant should be applied.
Lubrication
Note: Do not attempt to disassemble any components of the VMX3.
If possible, avoid long term storage of the VMX3 exposed
to direct sunlight or any very hot location. Over time,
prolonged high temperatures can adversely affect internal
lubricants.
Storage
Vortex Service and Repair Policy
VIP Unconditional Lifetime Warranty
Vortex Optics
2120 West Greenview Drive
Middleton, Wisconsin 53562
USA
Vortex Optics wants you to use the
VMX3 under any conditions with
complete confidence—that’s why
our warranty is straightforward and
simple:
Rest assured, if this magnifier should ever require repair, all
you need to do is contact Vortex for absolutely free service.
Call 800-426-0048 or e-mail [email protected].
• Fully transferable
• No warranty card needed
• No receipt needed