Vortex Optics STRIKEFIRE RED DOT - LOW MOUNT - Manual (Page 4)

RED DOT
StrikeFire
RED DOT
StrikeFire
7 6
The Vortex StrikeFire red dot sight offers ten variable illumination
positions. Dot brightness may be increased or decreased by using the
appropriate button:
• Tapping the top button increases brightness.
• Tapping the lower button decreases brightness.
Brightness Adjustments
NV Mode Button
Increase
Brightness
Decrease
Brightness
Using the StrikeFire with a Night Vision Device
If you are using the StrikeFire with a night vision device (not included),
pressing the NV mode button will activate the night vision compatible
mode. To deactivate the night vision mode and return to the standard
daytime mode, simply press the NV mode button one more time.
• The StrikeFire automatically returns to your previously selected
daytime brightness level.
Activating the night vision compatibility mode will automatically set
the dot brightness to the lowest level, which is necessary when using
the StrikeFire with a night vision device. While in this mode, the
Brightness Up / Brightness Down buttons will yield two brightness
levels.
• The StrikeFire automatically returns to the previously selected
brightness level when you return to the night vision compatible mode.
Note: While in night vision compatible mode, the dot will not be visible
unless a night vision device is being used.
8