beautypg.com

Illumination adjustment parallax adjustment, Variable power adjustment, Battery replacement – Vortex Optics RAZOR HD GEN II 1-6X24 RIFLESCOPE — VMR-2 Reticle User Manual

Page 4

background image

7

6

RIFLESCOP

Rotate ring to adjust
the magnification.

6

7

The Razor HD 1–6x24 riflescope uses an illuminated central dot to
aid in low light performance. Illumination intensity levels will vary
from bright to very low intensity.

The illumination dial allows for 11 levels of brightness intensity;
an off click between each level allows the shooter to turn the
illumination off and return to a favored intensity level with just
one click.

Illumination Adjustment

Parallax Adjustment

The Razor HD 1-6x24 riflescope is
non-adjustable for parallax correction
and is set from the factory to be
parallax-free at 100 yards [90 meters].

1. At distances under 100 yards,
parallax error is less than 1 inch.

2. At distances over 100 yards, parallax
error is minimal; using good consistent
shooting form and cheek weld will
prevent most problems with parallax.

Variable Power Adjustment

To change the battery, unscrew outer cap with a coin. Remove
the battery and replace with a new
CR 2032 battery.

Battery Replacement

Pull Illumination Dial
out to adjust intensity level.

Push Illumination Dial
in to set intensity level.

Battery Cover

To change the magnification, turn the magnification ring to the
desired level.