Brother VERSION 0 MFC-250C - Manual (Page 73)

Making copies
59
10
To enlarge or reduce the next copy follow the
instructions below:
a
Make sure you are in Copy mode .
b
Load your document.
c
Use the dial pad to enter the number of
copies (up to 99).
d
Press Copy Options and a or b to
choose Enlarge/Reduce.
Press OK.
e
Do one of the following:
„ Press a or b to choose the
enlargement or reduction ratio you
want. Press OK.
„ Press a or b to choose
Custom(25-400%). Press OK. Use
the dial pad to enter an enlargement
or reduction ratio from 25% to 400%.
(For example, press 5 3 to enter
53%.) Press OK.
„ Press a or b to choose 100% or
Fit to Page. Press OK.
f
Press Black Start or Color Start.
Note
• Page Layout is not available with
Enlarge/Reduce.
• Fit to Page does not work properly
when the document on the scanner glass
is skewed more than 3 degrees. Using the
document guidelines on the left and top,
place your document in the upper left
hand corner, with the document face down
on the scanner glass.
• Fit to Page is not available for a Legal
size document.
Making N in 1 copies or a
poster (Page Layout)
10
The N in 1 copy feature can help you save
paper by letting you copy two or four pages
onto one printed page.
You can also produce a poster. When you
use the poster feature your machine divides
your document into sections, then enlarges
the sections so you can assemble them into a
poster. If you want to print a poster, use the
scanner glass.
Important
10
„ Make sure the paper size is set to Letter
or A4.
„ You cannot use the Enlarge/Reduce and
Stack/Sort settings (MFC-290C) with the
N in 1 and Poster features.
„ N in 1 color copies are not available.
„ (P) means Portrait and (L) means
Landscape.
„ You can only make one poster copy at a
time.
a
Make sure you are in Copy mode .
b
Load your document.
c
Use the dial pad to enter the number of
copies (up to 99).
d
Press Copy Options and a or b to
choose Page Layout.
Press OK.
e
Press a or b to choose Off(1 in 1),
2 in 1 (P), 2 in 1 (L),
4 in 1 (P), 4 in 1 (L) or
Poster(3 x 3).
Press OK.