Canner use instructions, Steam canning – Victorio VKP1054 Steam Canner User Manual
Page 8

6
Canner Use Instructions
Please make sure you have read through the sections - Operating
Precautions (p. 2) and Indicator Knob Instructions (p. 5) - before
using your canner.
Warning! The steam and water will be hot and can cause a serious
burn injury. Use extreme caution while using your canner.
Steam Canning:
Processing times for boiling-water canners are the same as for steam
canners.
DO NOT let the canner boil dry. Check water level after each batch and
add more if needed.
DO NOT remove lid during processing. Removing the lid allows the
steam to escape and the jars will no longer be at the correct temperature. If
the lid is removed during processing you will need to bring the canner back
up to the proper heat level and restart the processing time to ensure the jars
are processed correctly.
1. Place rack in bottom pot with flat side up.
2. Fill the bottom pot with 2-1/2
quarts of water. The water level
should be just above the top of
the jar rack. (see diagram at right)
3. Preheat water to 140° F for raw-packed foods and to 180° F for hot-
packed foods.
4. Follow the directions in an approved canning guide to prepare and fill
the jars with the product you are going to process.
5. Place your prepared jars on the canning rack. It will hold 7 quarts or 8
pints.
6. Place the lid on the pot so the vent hole is towards the back and you
can easily read the indicator knob.
7. Make sure you know which “Zone” you are in according to your
altitude. If you do not, contact your local Extension office (see the
Troubleshooting Guide for more information on p. 8).
8. Turn your burner up so the water comes to a vigorous boil.
9. As soon as the needle reaches your “Zone’s” green area, start your
processing time (see p. 5 for Indicator Knob Instructions). Be sure