Undercover Hidden Hinge Version - Manual (Page 3)

QUICK START INSTALL GUIDE
Hidden Hinge Version
PAGE 3
5
4.1
Install Cover (continued)
Final Adjustment
With your cover closed, take a quick inspection to make sure that it is not
touching the bed on either side or the tailgate. The desirable gap is no
less than 1/8” and no more than 1/4”.
To adjust the cover front to back evenly, move both of the front brackets
forward or rearward accordingly. To adjust to one side or the other, move
the front brackets forward or rearward independently.
Be sure the front flap
hangs over the bulk-
head of the truck.
Adjust the lock strikes
up or down accord-
ingly. With the
tailgate down adjust
the lock strike to have
approximately 1/8”
gap between the lock
and the lock strike.
With the tailgate up
you should be able to
turn the lock with out
any resistance.
Further adjustment
may be needed to
achieve this.
UNDERCOVER TONNEAU
CORRECT
PLACEMENT OF
FRONT FLAP
HANGS OVER BULKHEAD
INCORRECT
PLACEMENT
OF FRONT FLAP
TRUCK BULKHEAD
HYDRAULIC STRUT
(LARGE END)
ATTACHES TO COVER
REAR BRACKET
PASSENGER SIDE
(ROD END)
LOCK
UNDERCOVER CLASSIC WITH DUAL LOCKS
UNDERCOVER SE WITH SINGLE LOCK
LOCK STRIKE
REAR BRACKET
TRUCK BED RAIL
LOCK CAM
LOCK ROD
LOCK STRIKE
REAR BRACKET
TRUCK BED RAIL
For C
ust
omer S
er
vic
e or W
arr
ant
y Issues
, C
ontac
t UnderC
ov
er D
ire
ctl
y (866) 900-8800 w
w
w
.under
co
verinfo
.c
om