3 appendix a, 3 appendix a 3.1 communication port, 2 contact information – Ultralife URB0003 User Manual
Page 11
MKM Multi-Kilowatt Module User Manual
Newark, New York | 315-332-7100 | Fax: 315-331-7800
©2013 Ultralife Corporation • www.ultralifecorp.com • All information is subject to change without notice.
The information contained herein is for reference only and does not constitute a warranty of performance. •
25 FEB 13 UBI-05342 Rev: -
Page 11 of 7
3 Appendix A
3.1 Communication Port
The communication port is a direct I2C Connection to the internal fuel gauge. The
fuel gauge is programmed at the factory for the specifics of the MKM chemistry.
There are a few correction factors needed to use the data stored in the fuel gauge.
Voltage must be multiplied by 8.
Current must be multiplied by 72.
Capacity in Ahr must be multiplied by 72.
All registers in the fuel gauge are available on the datasheet for the MAXIM 17047
Model M3 Fuel Gauge.
3.2 Contact Information
For Sales, Service, Technical and Safety Assistance:
Ultralife Corporation
2000 Technology Parkway
Newark, New York 14513
Phone: (315) 332-7100
Fax: (315) 331-7800