Briggs & Stratton Push - Manual (Page 15)

PREPARATION
15 F-030401L
HOW TO ASSEMBLE THE WHEELS AND HEIGHT ADJUSTERS
1. First, determine which of the height ad-
justers to attach to the front of the mower
housing. The front height adjusters
have index plates attached to the height
adjusters (Figure 7). The rear height ad-
justers do not have index plates.
2. Attach the front height adjusters to the
mower housing with the locknuts as
shown. Make sure to mount each front
height adjuster with the axle toward the
front.
3. Attached the rear height adjusters to
the mower housing with the locknuts as
shown. Make sure to mount each rear
height adjuster with the axle toward the
rear.
4. Mount the wheels onto the height ad-
justers with the fasteners as shown.
Figure 7
Mower
Housing
Locknut
15x68
Axle
Axle
Rear Height
Adjuster
Nut
15x68
Nut
15x84
Front Height
Adjuster
Wheel
Nut
15x84
Index
Plate