Briggs & Stratton Push - Manual (Page 13)

PREPARATION
13 F-030401L
HOW TO ASSEMBLE THE CONTROLS TO THE HANDLE
Two types of handles are shown in Figure 3.
The engine on your model will determine
which type of handle is on your model. Type A
is for models with Briggs & Stratton engines.
Type B is for models with Tecumseh engines.
Note: On models with Briggs & Stratton en-
gines, make sure the stop lever bracket is
on the left side of the handle. On models
with Tecumseh engine, make sure the stop
lever bracket is on the