Therma-Tru COMP 18 Replacement Parts - U1 Revised - Manual (Page 10)

Replacement
Parts 18.10 2014 (U1 REVISED) Comp 18
(3) 9/16” x 15/16” x 1/8”
Spacers
(5) #10 x 3/4” Phillips
Panhead TEKS 2 Screws
(2) #8 x 3/4” Phillips
Flathead Wood Screws
(1) “L” Bracket Transport Clip
(2) Lock Bore Sleeve
Shop
Prehanging
Instructions
for
Adjusta-Fit 2
Æ
For information on where to purchase
Therma-Tru entry door systems,
call 1-800-THERMA-TRU (843-7628)
or visit www.thermatru.com
Read instructions carefully before
pre-hanging your new Therma-Tru
Adjusta-Fit 2 system.
all
Please note there are separate
"Installation Instructions" for your
Adjusta-Fit 2 system.
Pre-Hanging Hardware Package
TA2HS
(2) Jamb seal pads
(2) #8-32 x 3/8” Self
tapping Screw
Type “F”
(2) #8 x 1-1/4” Phillips
Flathead Screws
(6) #10 x 2-1/2” Phillips
Flathead Screws
(2) #8 x 3/4” Phillips
Flathead Wood Screws
(2) 1-1/8” x 2-1/4”
Deadbolt Filler
Converter Plate
(2) #12-24 x 3/4” Phillips
Flathead Type “A”
Macine Screw
Deadbolt Cover
(Door)
1-1/8” x 2-1/4”
Deadbolt Cover
(Frame)
1-1/8” x 2-3/4”
CODES
Building codes may vary from area to area.
If a fire rating is required of the door and
opening being framed, the installer must
use installation materials and methods to
satisfy the authority having jurisdiction.
Therma-Tru provides labeled products,
but bears no responsibility for installation.
Read instructions carefully before
installing your new Therma-Tru
Adjusta-Fit 2 system.
all
Please note there are separate "Prehanging
Instructions" to be reviewed and followed
prior to completing the installation.
Site
Installation
Instructions
for
Adjusta-Fit 2
Æ
Field Installation Hardware Package
TB2HF
(5) #8 x 1/2” Phillips
Panhead Spear tip Screws (white)
Steel Frame Parts