Therasage Windsor Zero Gravity Recliner - Manual (Page 6)

1.
Plug the Far Infrared Heat controller, part D, into the lower socket on the right-hand side of the
control box located on the bottom left hand side of the back of the chair.
STEP THREE: Attach the electrical cords
Parts B, C, and D
2.
Plug the Zero Gravity controller, part C, into the cord that comes out of the back of the chair.
3.
Connect the power cord, part B, that plugs into the electrical outlet directly into one side of
the converter. Connect the power cord from the base of the chair into the other side of the
converter.
4.
Attach the Far Infrared heating element cords into the left-hand side of the control box. The
cord from the back cushion plugs into the lower socket and the cord from the foot cushion
plugs into the upper socket.
5.
Connect power cord to wall outlet. Turn power on. The On/Off switch is located on the top
left-hand side of the control box.