Therasage Task Chair - Manual (Page 7)

TheraForm™ Elite Task Chair
Optimal ergonomics for working comfort
hOW TO PERSONALIzE YOUR TASK ChAIR (continued)
SQUEAKS AND CREAKS
• Lubricate the spring in the control with motorcycle chain lubricant or self-penetrating oil.
DO NOT USE SOLVENT LUBRICANTS AND DO NOT LUBRICATE THE CLUTCH PLATES.
Sometimes new chairs need time to break in, so wait a few days to see if the noise
disappears.
• Gas lifts will squeak if left idle for extended periods of time. Lifting and lowering your chair
and rotating in your chair a few times will eliminate these squeaks.
• Check the Arm Caps to make sure that they are tightly attached to the Arm Bracket. If not,
use a Phillips screwdriver to tighten.
• Periodically check the casters and remove any carpet lint or grime. On chairs that are never
moved, check the bottom of the casters for flat spots. Replace the casters if necessary.
• Using carpet casters on a plastic chair mat will make noise. This can be easily corrected by
using soft wheel casters instead.
• If the lumbar pad is not heating, check to insure that the battery is fully connected.
• The recommended weight limit for this product is 250 lbs.