Telematrix SP750 User Manual
Page 21
21
LIVE DIALPAD XXX
PRESS 1=ON 2= OFF
Set up using keypad
dialing with automatic
speaker activation or
using key pad dialing
and pressing dial key to
activate.
LIVE DIALPAD Feature
(Administrator)
This feature sets up the telephone dialing
pad method.
When LIVE DIALPAD is OFF, and the
handset is ON HOOK, the user enters a
number on the keypad and then must
press the “DIAL” key to activate dial
tone.
When LIVE DIALPAD is ON, and the
handset is ON HOOK, the dial tone acti-
vates immediately upon pressing the key-
pad.
The handset can be lifted at any time to
activate the receiver.
To enable or disable LIVE DIALPAD ON.
1. Press and hold the “STORE” key for
6-seconds.
2. Press “STORE” multiple times until
the LCD displays “LIVE DIALPAD ON”.
3. Press “1=ON” to enable, or “2=OFF”
to disable.
4. To exit the program mode, press
“DISC” or continue to the end of pro-
gramming by pressing the “STORE”
key multiple times until the display
reads “All Setup OK”.
LIVE DIALPAD ON
12/01
PM
12:00
PRESS 1=ON 2=OFF
12/01
PM
12:00
Display indicates condition of ON or OFF, then next screen appears.
NOTE: The Live Dial Pad feature works only
when the handset is ON HOOK, it does not
work when the handset is OFF HOOK.
!
Note: Programming can
only be performed when
the phone is on-hook
!