Telematrix SP400 User Manual

Page 20

Using a Pause when Dialing a Phone Number

To use a Pause when dialing, press the “PAUSE” key at the appropriate point in the
number sequence being dialed from the key pad.

NOTE: Each “Pause” counts as 1-digit when stored into a speed dial memory location..

NOTE: The default Pause timing is 3.6-seconds.

A multiple of Pauses can be programmed

into speed dial memory to increase the delay.

Note: Programming can

only be performed when

the phone is off-hook

Programming Pause into Voice Mail

To store a Pause time into Voice Mail memory, simply press the Pause key in the number-
ing sequence when programming the Voice Mail Speed Dial Key. See programming Voice
Mail on the next page.

Programming a Pause into Speed Dial Memory

Pause time can be programmed into the speed dial memory. This function will delay the
dialing pattern of a number when stored in the phones speed dial memory. Multiple pauses
can be programmed into the dialing pattern for added delay time. To store a Pause into
Speed Dial memory, simply press the Pause key in the numbering sequence when pro-
gramming Speed Dialing Keys. See programming Speed Dial Memory on the next page.