beautypg.com

Telematrix SP400 User Manual

Page 15

background image

15

Message Waiting Light Indicator

The Spectrum PLUS

TM

telephone has a

Message Waiting (MW) Light Indicator (figure
1). The indicator will blink to indicate that a
new message is in the user’s voice mailbox.
The Spectrum PLUS

TM

supports the following

telephone or PBX supplied message waiting
signals:

1. Telephone Company VMWI Service* (FSK

signal compatible, subscription to local
telephone company is required).

2. Or, Audible Stutter Dial Tone (SDT) signals

provided by local telephone company.

3. Or, 90-Volt NEON message waiting light

indicator signal provided by a PBX.

4. Low Voltage LED message waiting light in-

dicator light signal is provided by a PBX.



The PBX system or telephone service provider
has to activate the voice mail feature for the
light to illuminate and work properly. Be sure
that your telephone service provider or PBX
system has the compatible messaging service
available in your area or facility.

figure 1

Message Waiting Light Indicator

NOTE: The Spectrum PLUS

TM

telephone automatically reads the

Message Waiting (MW) signals

supplied by your service provider.

The LED signal supplied by a PBX

must have the LED Voltage switch

which is located on the back of the

t e l e p h o ne i n t h e c o r re ct

position to operate the LED. See

the next page for instructions.

!

Feature Note: Message ON/OFF Notification.

Use this feature when alerting another that a saved message is in voice mail for that person or

use this feature when you simply want to turn the light off.

Be Aware: If there is a new incoming message and the telephone company continues to send

a new signal this light will re-activate. This will occur only when there is a new voice mail that

has not been heard.

How To Use: When on-hook, Press the “*” key for 3 to 5 seconds and the Message LED will

automatically turn on. At any time press “*” key for 3 to 5 seconds ,Message LED will turn off.

f

*Definition: VMWI is Visual Message Waiting Indication. This option requires a

subscription to your local telephone service provider for TouchLite

TM

to activate.

d