Talos Security DK1400 Series Quick Start Reference Guide User Manual
Page 13
13
Configure DVR to access video on local computer
1. Click the drop-down arrow next to “Type”,
select “Static”
2. Enter the new IP address into the field.
•
Eg.192.168.1.222
3. Enter “7777” into “Port”
4. Enter “80” into “Web Port”
5. Click “Apply”, then “Exit” and exit the DVR
menus
6. Restart the DVR as outlined on page 6
1
2
3
4
5
1. Click the NVClient shortcut on your desktop
to launch the NVClient software
2. The first time you launch NVClient you will be
prompted to enter a username and password
Note: This user name and password protects the
client software from unauthorized access and
is not the same as the username and
password used in your DVR.
Using NVClient to access your DVR from your PC