Talos Security RMS (DRMX/DRMXU) - Manual (Page 17)

4. Press [ Send] after complete configure to apply all modified configurations to
DVR.
7.3. Save & Load Configuration file
1. Select [Open] on file menu.
2. Select a saved configuration file.
3. Modify any values then saved the file as [save] or [save as].
4. Press [Send] to apply modified values to DVR.
7.4. Configuration initialize /Factory default
1. Select [Setup Data Reset] from file menu.
2. All values will be initialized on configuration file.
3. Select [DVR All reset] from file menu to set factory default the DVR set.
4. Press [Send] buttons to apply the modification onto DVR.
*DVR All Reset will reset all Configuration of DVR, include IP address also.