Summit SEH2624 - Manual (Page 12)

12 11
D C
4. Hang the range hood on the wall:
Hang the range hood on screws A and B, then tighten the screws securely. Fix two
screws into the C and D holes through the corresponding holes inside the hood.
Assemble flexible aluminum tubing to the plastic fitting on the hood. Connect the
other end of the tubing to the wall outlet. Assemble upper exhaust to lower
exhaust. Place both parts on the range hood. Screw lower exhaust to the body
using the side holes. Fix upper exhaust by using the holes on the side of exhaust
mounting plate fixed to holes E and F.
Product has three-speed motor and a multi-positioned switch to command the
motor. For best performance, we recommend you to operate the unit at high
speed in excessively smokey and smelly places. Motor starts as the slider switch
is opened and stops as the slider set is closed.The slider button at the bottom of
the device is for turning the device on. To turn on the device, slide the button to
the right.
Hood must be started a few minutes before cooking starts and continue to
operate after cooking is finished until odors and fumes are removed.
LIGHTING
Hood has 2 lamps and a lamp switch to command the illumination. To turn the
illumination on, slide the slider illumination button to the left.
EFFICIENT VENTILATION
For correct ventilation, windows opening outside must be kept closed. Doors
and windows opening to other rooms may be kept open.
IMPORTANT NOTE!
Pay attention when operating the hood simultaneously with devices that
work by burning the ambient air with fuel (such as gas heaters). The
burning may be affected because the hood discharges air in the room to
the outside.
This advice does not apply to hoods not having an outside exhaust.
SPEED CHOICE
OPERATION