Summit SCR1005 - Manual (Page 5)

LOCATION OF PARTS
Temp. c F
Door
Full Shelves
Digital Control
Bottom
Shelf
Adjustable
Leg
Handle
Condenser
Security
Lock
Panel
Cabinet
Evaporator Fans
INSTALLATION INSTRUCTIONS
BEFORE USING YOUR APPLIANCE
 Remove the exterior and interior packing.
 Before connecting the appliance to the power source, let it stand upright for approximately 2 hours.
This will reduce the possibility of a malfunction in the cooling system from handling during
transportation.
 Clean the interior surface with lukewarm water using a soft cloth.
 Install the handle on the door. (See page 8.)
INSTALLATION OF YOUR APPLIANCE
 The appliance is designed for free-standing installation only.
 WARNING: Do not store or install the appliance outdoors.
 CAUTION
: This appliance is designed for storing and cooling beverages and drinks. Do not store
perishable food, medicine or other medical products.
 Place your Beverage Merchandiser on a floor that is strong enough to support it when it is fully loaded.
To level the unit, adjust the front left adjustable leg at the bottom of cabinet.
5