beautypg.com

Care and maintenance, Electrical circuit diagram – Summit SWC546LBI User Manual

Page 6

background image

- 6 -

Cleaning your wine cellar

Care and Maintenance

Unplug the wine cellar and remove the bottles.

Wash the inside with a solution of warm water and baking soda. The solution should
consist of about 2 tablespoons of baking soda to a quart of water.

The outside of the wine cooler should be cleaned with mild detergent and warm
water.

Take out the water box at the bottom and wash.

Moving your wine cellar

Remove all the bottles.

Securely tape down all loose items inside the wine cellar.

Turn the leveling legs up to the base to avoid damage.

Tape the door shut.

Be sure the wine cellar stays in the upright position during transportation.

Reversing the door swing

As you received your wine cellar, the door swings open at the left. If you wish to reverse

the swing so that the door opens from the right, it is most important to have at least one

other person to help.

It is very dangerous to try to reverse the door swing by yourself. Now, unscrew the upper

door hinge while the second person supports the door. Remove the upper hinge and

carefully lift the door off the bottom hinge. Unscrew the bottom hinge and install it on the left

side of the unit. Flip the door around so that the handle is on the right side and slip the door

over the bottom hinge. Reattach the door by screwing the top hinge into the holes provided

on the upper left surface of the unit. Make adjustments as necessary to be sure the door is

aligned properly.

Electrical Circuit Diagram