Summit SWC1545 - Manual (Page 10)

DOOR LOCK
Your unit is provided with a lock and key combination. The keys are located inside the plastic bag that
contains the Instruction Manual. Insert the key into the lock and turn it clockwise to lock the door, making
sure the metal bracket is engaged completely. To unlock the door, reverse the operation. Remove the key
and place it in a secure place for safekeeping.
OPERATING PROBLEMS
START-UP
Compressor does not start even though the desired temperature is lower than the temperature in the
room.
1. Check the wall socket by plugging in any type of electrical device.
2. Plug in the wine cellar.
3. Press the TEST button and check that the red and green indicator LEDs light up (in Standby mode).
4. If the compressor still does not start up, call for service.
Compressor does not stop.
1. Place your hand on the condenser (metal screen at the back of the cabinet) to check its temperature.
Call for service if it is cold.
2. If the condenser is hot, set the cold temperature as high as possible and make sure the compressor
indicator goes off. If the compressor does not stop, unplug the appliance and call for service.
DURING OPERATION
The Digital Display shows a temperature lower than the temperature you set.
1. Check the temperature set points.
2. Check that the red Electric Heating LED is on.
3. Press the TEST button and check that the red and green indicator lights on the right side of the control
panel are on. If not, call for service.
The Digital Display shows a temperature higher than the temperature you set.
1. Check the temperature set points.
2. Check that the green Compressor LED is on.
3. Press the TEST button and check that the red and green indicator lights on the right side of the control
panel are on. If not, call for service.
NOTE: The wine cellar must only be serviced by a qualified refrigeration technician, who must check the
circuit for leaks before putting the unit back into service. Any servicing of the electrical circuit must
only be performed by a qualified electrician.
Whatever the case, if your appliance does not seem to be operating normally, unplug it and call for
service. SUMMIT's Customer Help number is 1-800-932-4267.
10