Broilmaster PC2CART-1 - Manual (Page 9)

Page 9 B100999-2-0807
Using four 1/4-20 x 3/4 screws, fasten the grill to the
cart. Figure 4.
Note: To ease assembly you may wish to install the ig-
niter as shown in your Broilmaster ® grill manual before
attaching the grill to the cart.
C
ART
A
SSEMBLY
F
IGURE
4
Install one 1/4-20 x 1/2 hex head BOS into drip pan
drawer assembly (2) and tighten knob (1). Figure 5.
F
IGURE
5
Slide the mounting tabs on the control (7) housing be-
hind the opening on the cart. Figure 6.
For "P" series head installation, align the holes in
the front of cart with the two upper nuts on the control
housing (with the mounting tabs positioned inside
cart) and attach with the two 10-24 x 3/8 phillips head
screws. Figure 6.
Place the drip pan in the drip pan drawer and slide onto
drip pan bracket. Figure 7.
F
IGURE
7
F
IGURE
6
5
6
7
8
9
For "T" series head installation, align the holes in
the front of cart with the two lower nuts on the control
housing (with the mounting tabs positioned inside
cart) and attach with the two 10-24 x 3/8 phillips head
screws. Figure 6.