SPYPOINT X-CEL - Manual (Page 4)

6 7
English
English
SCOPE
The diameter of the scope bracket is 1" (24mm) and is suitable
for most scopes. Some scopes might not be compatible with this
kind of bracket. An optional 1.2" (30mm) adaptor is available
(SC-30mm). (Refer to the section « OPTIONS »)
MOUNTING :
HELMET
To install the camera directly
onto a helmet, use the "helmet"
bracket. According to the
desired installation, use either
the short or the long strap.
Forehead mount
Scope
Helmet
Bow
FOREHEAD MOUNT
This bracket is used to directly
install the camera on the forehead.
BOW
The bracket for the bow is normally
positioned to the front of the bow,
with the screw (included), where the
stabilizer is usually located.