SPYPOINT S-LIVE - Manual (Page 7)

12 13
English
English
In TEST mode, it is possible to take a picture by pressing the
OK button. The photo is saved and appears in VIEW mode.
The TEST mode also provides information on:
1. The battery level
2. The cellular signal strength
3. The used space on the memory card (as a percentage)
VIEW
Allows the user to view photos or videos on the built-in
3.5" screen of the camera or on a TV set.
With 3.5" built-in screen:
When VIEW mode is selected, the last recorded image or video
automatically appears on the screen. Press the
▲ or ▼ button to
view the next or previous file. Press OK to see the different options
available:
Play: Plays or pauses the video on the screen. (This
option is available only for videos)
Delete: Deletes the photo or video displayed on the screen.
Delete all: Deletes all photos and videos that were not
protected.
Format: Deletes the entire contents of the memory card,
including protected files.
1.
2.
3.
Note: Press the ▲ to enlarge the image on the screen
or ▼ to return to the original size. When the image
is enlarged, use the navigation buttons to video the
part of the image wanted. Press BACK to return to
original size.
With a TV set:
Allows the user to view photos and videos directly on a TV set. Turn
on the camera and plug the yellow end of the composite video cable
supplied with the camera to VIDEO IN input of the TV set and the
other end into the TV OUT output of the camera. The camera screen
turns black and the last recorded picture or video will appears on
the TV screen. To change the photos or videos, use the
▲ and ▼
button. The options are the same as when viewing on the built-in
screen of the camera (see above).
SETTINGS MENU
Allows the user to set the advanced settings of the camera. To set
the system in another language, press the
▼ button until the option
“Language” is highlighted. Press OK and modify the selection with
▲ or ▼ button. Confirm the choice by pressing OK. The system
will change all the menus in the selected language.
Navigating the menu:
• ▲ and ▼ buttons to change settings
• OK button to confirm changes
When selected, some options affect the behaviour of other
options from the list of the settings menu. In this case, the
selected option is displayed in yellow and options affected are
shown in gray.
Date: Set the date as Year/Month/Day
Time: Set the time as Hour/Minute/Second
Note: The seconds are not printed on the
pictures when “Stamp” option is activated.