SPYPOINT IR-8 User Manual
Page 15
28
29
teSt
To use to set the camera or the distance
setting. When the « TEST » mode is selected,
no picture or video is recorded. Walk
perpendicularly in front of the camera. When
the camera detects movement, the light winks
to indicate that normally, a photo or video would be recorded. If
the system does not detect the movement, increase the distance
detection using the wheel « DISTANCE » or realign the system
differently. When you understand how the device responds to
detections, you can better adjust the direction or the height of
the installation.
SettiNGS
Serves to allow own operator settings. To
configure the system in English, press the
button «» until « Language » is highlighted.
Press « OK », select « English » with the
button «» or «» and confirm the choice with « OK ». The
system will change all the menus in English by itself.
Work: 24H: Photos or videos anytime.
Day: Photos or videos during daytime only.
Night: Photos or videos during night time only.
delay: To select the time interval before the camera
records another photo or video. This option
prevents from taking too many photos
or videos.
Multi-shot: To take up to 6 consecutive shots at each
detection, with a 10 second delay between
each photo. This option allows up to 6 pictures
from different angles when the camera is in
« PHOTO » mode.
Video length: Allows you to select the recording duration
when the camera is set in « VIDEO » mode.
English
Language:
To select language for the camera’s menu.
date:
To set the date as Month / Day / Year
time:
To set the time as Hour / Minute / Second
Stamp:
To select or cancel imprinting of date,
time, temperature and moon phases
on photos.
Full
moon:
New
moon:
First
quarter:
Last
quarter:
Quality:
To select the photo quality. If the user
wishes to record more images on the
memory card this option allows very
high quality of 8 MP or lower quality
such as « normal » 5 MP or « low » 3 MP.
Continuous:
To allow taking pictures even if the
memory card is full. The camera will
continue to record photos by deleting the
first pictures recorded.
temperature:
To select the temperature display in °F or °C.
Power:
To allow you to select the battery power
or the electricity power.
English
T
Test
Settings