SPYPOINT I-6 - Manual (Page 7)

12 13
English
English
The " DISTANCE " dial (placed on the side of the camera) can
adjust the sensitivity of the detector. The camera is equipped
with a detector sensitive to infrared. The system detects only heat
source in motion. The greater the mass of heat, the more the system
is sensitive .
Range of detector is between 5 and 50 feet. The best
way to adjust the distance is to set the camera in "SET/ TEST " mode
(see above). Make sure to have the least possible objects in front of
the camera during the positioning. This prevents picture taken by
the camera when oriented towards the sun while an object moves in
front of the camera (eg. a branch).
DOWNLOAD TO A COMPUTER
To transfer or view photos and videos on a PC, you must first
turn the camera "OFF" and connect the USB cable (supplied)
from the camera and to your computer. The computer will
recognize the camera and install the software itself. Click on
"My Computer" and select "Removable Disk". Then click
"DCIM" and "100DSCIM" to find all your photos
and videos.
Taking the SD card out of the camera and inserting it into the
computer port will achieve same results. If no SD slot is built
into the computer, a multi-card reader RD25-1 (sold separately)
must be used.
TROUBLESHOOTING
No person / animal on photos
1. Rising sun or sunset can trigger sensor. Camera must
be reoriented.
2. At night, motion detector may detect beyond range
of the IR illumination. Reduce distance setting.
3. Small animals may be triggering unit. Reduce
distance setting and/or raise height of camera.
4. Motion detector may sense animals through foliage.
5. If person/animal moves quickly, it may move out
of the camera’s field of view before photo is taken.
Move camera further back or redirect camera.
Camera must be set on a stable and immovable
object i.e. large tree.
6. Make sure the mounting post or tree is stable and
does not move.
Red light in front of camera blinks
1. "MODE" switch is in "SET/TEST".
2. "MODE" switch is in "PHOTO" or "VIDEO".A
red light on the front of the camera flash for 60
seconds to allow the user to leave without being
photographed or filmed.
The camera screen turns off
The camera may be set to "PHOTO" or "VIDEO" mode
and the screen turns off after a period of 60 seconds in
order to preserve battery life.
OPTIONS
To obtain more information on the available options, go to
www.spypoint.com. The following items are popular options
that can be added to a SPYPOINT camera model I-6 :