Blaupunkt MONTE CARLO TCM 169 - Manual (Page 38)

102
Dialling a telephone number
The telephone mode must be switched on.
Always use the area code for the number
you are dialling, even if it is a local number.
Manual
• Dial the number using the number
keys.
The number you enter will appear in the dis-
play.
Correcting the number
To delete a digit:
•
Select the digit you wish to correct us-
ing the rocker switch << / >> (digit will
flash).
• Press CL briefly.
To delete a number:
•
Press CL for approx. 1 second.
To start dialling/end call:
•
Press .
Using speed-dialling . . .
You can recall stored telephone numbers
with the corresponding name or the number
of the entry.
The numbers which can be recalled in the
telephone’s memory bank range from 1 to
25, on the SIM card from 101 to a maximum
225.
It is possible to use one-touch dialling for
the first nine telephone numbers in the ba-
sic telephone menu by pressing the corre-
sponding number key directly.
. . . directly from the memory bank:
• Press the corresponding button (1 to 9)
for approx. 2 sec. until you hear a
beep.
The call will be placed automatically.
. . . directly from the SIM card memory
bank:
• Press * and the corresponding button
(1 to 9) one after the other for approx.
2 sec. until you hear a beep.
The call will be placed automatically.
. . . from the telephone book
• Press ME.
• Use / to select
“Find entry by name” or
“Find entry by position”.
• Confirm your selection by pressing
OK.
If “Enter name” appears in the display
•
use the selection buttons to enter up to
the first three letters in the name.
If “Enter position” appears in the display
•
use the selection buttons to enter the
position number of the entry.
• Confirm your entry by pressing OK.
If you know the position number of the entry
you can enter it immediately after pressing
ME and confirm your selection by pressing
OK.
The desired telephone number will appear
in the display.
Using the telephone