SDC 12VR User Manual
12vr regulator module wiring
12VR REGULATOR MODULE WIRING
All SDC power supplies are equipped with a filed selectable 12VDC or 24VDC output.
The addition of the 12VR enables dual 12VDC and 24VDC output capability. The 12VR is a
12VDC, 500mA Regulated and Filtered Output Module. With the power supply output set at
24VDC for locking devices and components, the addition of the 12VR provides a separate
12VDC 500mA output for Access Control or other 12VDC devices.
P:\INSTALLATION INST\POWER SUPPLY\INST-12VR\INST-12VR.vsd Rev A 10-11 Page 1
Any suggestions or comments to this instruction or
product are welcome. Please contact us through
our website or email [email protected]
801 Avenida Acaso, Camarillo, Ca. 93041 • (805) 494-0622 • Fax: (805) 494-8861
www.sdcsecurity.com • E-mail: [email protected]
12VDC OUTPUT TO
ACCESS CONTROL
(500mA MAX LOAD)
24VDC INPUT FROM
POWER SUPPLY
+
-
+
-
RED
BLK