Schwank agroSchwank User Manual
Page 4
GP-MAGR-BX-06A
agroSchwank / IN Manual
RD: Sept 2005
RL: 6
KH
Page 1
The agroSchwank / IN gas fired infra-red luminous heaters are suitable to be installed for heating of
non-residential indoor spaces. These installation instructions are intended for the agroSchwank / IN
heaters. All installations must conform to the following installation requirements. All local, provincial
and national code requirements including the current latest edition
B149.1 INSTALLATION CODE
in
Canada, or ANSI Z223.1 in the United Sates for gas burning appliances and equipment. The latest edi-
tion Electrical Code PART 1 CSA C22.1 in Canada or ANSI/NFPA N0 70 in the United States must
also be observed.
Due to ever changing standards and requirements, revision to our equipment and installation procedures
may be necessary. In case of discrepancies, the latest installation manual will take priority.
The agroSchwank / IN heater is approved for Agricultural installations as well as other non-residential
indoor spaces. It is beyond the scope of these instructions to embrace all conditions that will be encoun-
tered. All system piping must be supported in accordance with acceptable practice, local codes, and ap-
plicable standards.
AGROSCHWANK / IN
HIGH EFFICIENCY PORK NURSERY HEATER
INSTALLATION INSTRUCTIONS
1. GENERAL
2.1 INSTALLATIONS OTHER THAN SPACE HEATING
Use for process applications will void the C.S.A. certification and will require governing authority field
certification at the installers/owners responsibility and expense.
2. INSTALLATION REQUIREMENTS