S&S Cycle Stealth Air Cleaner Kit for 2008 and Up Throttle-by-Wire Motorcycles User Manual

Page 4

16. Remove the 5/16" button head screw from the plastic top filter plate.

Picture 11 illustrates the button head screw.

17. Attach an S&S air cleaner cover or the stock Harley-Davidson® Twin

Cam 88®, 96™ and 103™ air cleaner cover to the stealth air cleaner
kit by installing the 5/16" button head screw with 243 blue Loctite
applied to the threads and torque to 10 ft.-lbs.

Picture 11

Picture 12

CARB label here

18. On 2001 and later fuel injected bikes apply the included label

containing the EO number to the frame down tube above or below
the factory label. Do not cover up any portion of the factory label.

5/16" Button Head Cover Screw

1. Screw, SHCB, 5/16-18 x .500", Polished, Stainless Steel ......500-0051
2. Screw, SHC, Flanged Button, ¼-20 UNC x .750"

(Each)

.....500-0060

3. Plate, Top, Air Filter, Molded, Plastic ..................................... 170-0026

4. Filter, Air, Tapered, Standard Pleated,

5.500" x 6.000" x 2.375", Cotton, Stealth Air Cleaner Kit 170-0043

5. Screw, SHCB, ¼-20 UNC X .825"

(Each) 3 required

....................500-0059

6. Backplate, Air Cleaner, Throttle-by-Wire, Machined,

Stock Bore, Black, Die Cast, 2008-up bt ............................... 170-0065

6a. Backplate, Air Cleaner, Throttle by Wire, FinalMachined,

64mm, Black, Die Cast, 2008-Up bt ............................. 170-0167

6b. Backplate, Air Cleaner, Throttle by Wire, FinalMachined,

72mm, Black, Die Cast, 2008-Up bt .............................170-0168

6c. Backplate, Air Cleaner, Throttle by Wire, Stealth,Packaged,

S&S® B2 70mm Throttle Body, 2008-Up bt ........... 170-0169

7. Screw, Backplate Vent, SHCB, 3/8-16 x 1-1/2",

Polished,Stainless Steel

(Each)

2 required

................................... 170-0045

8. Washer, Flat,.380" x .880" x .024", Nitrile Rubber Coated,

Cold Rolled Steel

(Each) 8 required

................................................... 50-7054

9. Gasket, Throttle Body, Throttle-by-Wire, 58mm/72mm Opening,

.0625" Thick, 2008-up bt ............................................................ 160-0035

Gasket, Throttle Body, Throttle-by-Wire, 64 mm Opening,

.0625" Thick, 2008-up bt ...........................................................160-0050

S&S Stealth Air Cleaner Kit for 2008 and Up Throttle-by-Wire Motorcycles