S&S Cycle Air Cleaner Element No. 17-0376 User Manual

Cycle, inc

S&S

Cycle, Inc.

14025 County Hwy. G Box 215

Viola, Wisconsin 54664 U.S.A.

Phone: 608-627-1497 Fax: 608-627-1488

Technical Service Phone: 608-627-TECH (8324)

Technical Service Email: [email protected]

Website: www.sscycle.com

Instruction 51-1095

5-28-02

by S&S Cycle, Inc.

Printed in the U.S.A.

S&S Service Bulletin #41

S&S Air Cleaner Element No. 17-0376

After extensive testing, S&S has chosen Air Cleaner Element #17-0376
to replace previous elements. Element #17-0376 provides increased
air flow while at the same time improving filtration of materials potentially
harmful to the engine. Filter #17-0376 captures particles as small as
10 microns.

Installation

1. Remove air cleaner cover and old element.

2. Install element #17-0376. Flat side goes against air cleaner

backplate. Insure that element goes around outside edge of
locating tang at 9 o’clock position on backplate. Rounded side
of element with S&S Part # goes toward outside. Correctly
installed element will remain in place on backplate without
support.

3. Taking care not to dislodge element, replace air cleaner cover

and tighten screws securely.

Note - Filter #17-0376 utilizes an element that is not washable. It must
be replaced when soiled enough to impair performance. Replacement
filters are available from S&S Cycle and other aftermarket sources.
S&S assumes no responsibility for problems associated with filters
obtained from other sources. Request genuine S&S filters.