Bose CineMate GS Series II - Manual (Page 10)

8
S YSTEM S ETUP
Italiano Svenska Deutsch Nederlands English Français Español
3. Insert each plug into the connector on the proper
speaker.
The plug marked RIGHT goes into the speaker
placed to the right of your TV (facing toward the TV).
(Refer to for placement guidelines.)
4. Insert the single plug at the other end of
the speaker cable into the connector
labeled SPEAKERS on the back of the
Acoustimass
® module.
5. Tighten each fastener screw by hand to secure
the plug.
CAUTION: Do not plug the Acoustimass module into
an AC power (mains) outlet until all other components
are connected.
6. Continue with on the next page.
1
Fastener screws
3
00.Kaiser_OG.book Page 8 Friday, May 15, 2009 7:15 AM