S&S Cycle Air Cleaner Kit 41-0021 for Victory Freedom Engines - Manual (Page 4)

11- Using the supplied 8”cable tie, secure the MAP sensor to the injector and coil wires as shown in Picture 6.
12- Using the supplied 4” cable tie, secure IATS and Throttle Position Sensor wires as shown in Picture 7.
13- Install remaining parts, reversing the order of removal and following instructions in your Victory service manual section Engine Removal &
Installation.
14- Reprogramming the Engine Control Module (ECM) must be done by an authorized S&S/Victory® dealer using S&S Freedom® Performance
Tuner which is available to authorized S&S/Victory dealers only. The S&S Freedom Performance Tuner comes complete with instructions for
ECM re-programming.
15- Test drive vehicle to ensure proper operation and verify that there are no leaks.
4
Picture 7 Picture 6
Secure cable tie as shown.
MAP Sensor
S&S® AIR CLEANER KIT PN 41-0021 FOR VICTORY®
1- Filter element ........................................................41-0006
2- SBHC Screw, M6X1 x 20, 10 pack ....................50-8421
3- Breather hose union, .500” ID ..........................41-0008
4- Clamp, hose, spring, .440” DIA ........................50-8143
5- Double wire spring clip .....................................50-8156
6- Hose, 3/16” ID x 12” ..................................................41-0015
7- Spacer, coil mounting ........................................41-0011
8- Breather hose, formed .......................................41-0012
9- Wire ties, 8” Blk, Nylon ........................................50-8346
10- Wire ties, 5 pack ....................................................50-8181