S&S Cycle California X-Wedge Engine User Manual
Page 2
2
Congratulations on purchasing an S&S® engine! Your new engine is designed and manufactured with the same care and attention to detail as those
used to set speed records and win races around the world.
This manual has been prepared to acquaint you with the operation, care, and required maintenance of your engine. It also notifies you of important
safety information and provides authorized service personnel with necessary emissions control specifications. Other S&S publications discuss
repairs and/or changes to the engine configuration. For information related to other components and systems on the motorcycle consult the
manufacturer’s manuals.
This engine conforms to U.S. Environmental Protection Agency and the State of California applicable exhaust gas and evaporative emissions
regulations effective on the date of manufacture. A small volume motorcycle manufacturer, kit manufacturer or assembler may use this engine
without applying for a separate emission certificate.
Per the tampering and defeat device prohibitions, under the Clean Air Act and California State law, it is illegal to remove or render inoperative any
device or element of an emissions control system, or to install any part or component that would bypass, defeat, or render inoperative any device or
element of design installed on the vehicle under the Clean Air Act or California State law regulations. This includes but is not limited to any changes
made to camshafts, fuel metering system, ignition, exhaust system or evaporative system.
ENGINE IDENTIFICATION NUMBER
The Engine Identification Number (EIN) is stamped on the outside of the front motor mount on both the left and right side of the crankcase. It
consists of a ten-character code, with the first and last characters being stars (*). The second character is a letter that designates the code for the
manufactured year of the engine. The final four characters before the star are the crankcase serial/sequence number for that year.
Example: *H5500103* represents crankcase sequence number 103 made in 2007
Year Code
2005
F
2006
G
2007
H
2008
J
2009
K
2010
L
OPERATION
Engine Speed and Load
Exceeding 5,800 RPM under any circumstances may damage the engine.
An engine that is run long distances at high speed or under heavy load may overheat. Oil and spark plugs should be inspected more frequently
when the engine is subjected to extreme temperatures.
CAUTION
TABLE OF CONTENTS
Engine Identification Number ...................................................................Page 2
Operation ...........................................................................................................Page 2
Maintenance .....................................................................................................Page 4
Emission Control Warranty Statement ....................................................Page 8