S&S Cycle Pushrod Cover Kits & Pushrod Cover Seal Kits for 1936–2014 Harley-Davidson & S&S Engines User Manual

Cycle, inc

S&S

Cycle, Inc

14025 Cty Hwy G PO Box 215

Viola, Wisconsin 54664

Phone: 608-627-1497 • Fax: 608-627-1488

Technical Service Phone: 608-627-TECH (8324)

Technical Service Email: [email protected]

Website: www.sscycle.com

Instruction

510-0282

06-17-14

by S&S® Cycle, Inc.

Printed in the U.S.A.

Assembly Instructions: S&S Pushrod Cover Kits &

Pushrod Cover Seal Kits

for 1936–2014 Harley-Davidson® & S&S Engines

efer to the diagram to determine the correct

positions for pushrod cover components, and
the correct type of seals for various engine
styles. Note that depending on the kit you have
purchased, not all the components may be
included. In these cases it is expected that stock
components will be reused. In addition, not all
applications will use all components shown.

Top pushrod seal

a. Harley-Davidson® knucklehead and S&S

KN-Series engines – this is a square o-ring.
Same seal in all three positions.

b. Harley Davidson® panhead, shovel,

Evolution® and Twin Cam 88® 96™ and
103™ and S&S P, SH, V, and T-Series engines
– the thickest o-ring of the three provided
in the kit

Top Pushrod cover

Pushrod cover keeper

Cover cap

Cover cap spring

Cover cap washer

Middle seal

a. Harley-Davidson® knucklehead and S&S

KN-Series engines – this is a square o-ring.
Same seal in all three positions.

b. Harley Davidson® panhead, shovel, Harley-

Davidson® Evolution® and Twin Cam 88®
96™ and 103™ engines and S&S P, SH, V, and
T-Series engines – the smaller diameter of
the thinner o-rings provided in the kit

Lower pushrod cover

Bottom cover washer – All Harley Davidson®
Evolution® big twins and S&S V-Series
engines, 1986-’90 Sportster® models, and all
S&S SB-Series engines. (not included in kit)

10.

Lower pushrod seal.

a. Harley-Davidson® knucklehead and S&S

KN-Series engines – this is a square o-ring.
Same seal in all three positions.

b. Harley Davidson® panhead, shovel, and

S&S P, SH-Series engines – This is a quad
seal

c. Harley-Davidson® Evolution® and Twin

Cam 88® 96™ and 103™ engines V, and
T-Series engines – the larger diameter of
the thinner o-rings provided in the kit