RSVP French Fry Cutter - Manual

To remove the cutting grid, press the button
on top to release the grid and slide it out from
below the cutter. To install, push the grid up
into slot until you hear it click.
To remove the pusher plate, turn the
plastic lever clockwise to unlock and
release it. To install, fit the pusher
plate’s hooks through the metal plate
and turn the plastic lever counter­
clockwise to lock.
To mount the cutter to a countertop or
cutting board, flip the suction base lever to
the opposite side. Make sure the cutter is
stable and secure before using.
✽ Use whole or cut potatoes
no larger than 3.5" long x 2.5" dia.
to avoid jamming the hopper
3.5" long
2.5" dia.
French Fry Cutter
Use and Care Instructions
•
Wash all parts thoroughly prior to first use. Install the desired cutting grid 2
and its matching pusher plate 3 . Mount the cutter onto a smooth countertop
or cutting board by flipping the suction base lever 5 to the opposite side.
•
Raise the cutter arm 1 and place a whole or cut potato into the hopper 4 .
The potato should fit loosely. ✽
•
Press the cutter arm 1 all the way down using firm, constant pressure to cut.
1. Cutter Arm
2. Cutting Grid
3. Pusher Plate
4. Hopper
5. Suction Base
Lever
1
2
3
4
5
Press the cutter arm all the
way down to cut, using
firm, constant pressure.
Did you know?
French fries most likely
originated in Spain,
in the 15th century
Cutting Grids / Pusher Plates
Regular Large
TO CLEAN: Hand or spray wash with
soapy water, rinse and dry. Use caution
when handling the sharp cutting grids.
CAUTION: CUTTING GRIDS ARE SHARP. AVOID
DIRECT CONTACT WITH FINGERS AND HANDS.
KEEP OUT OF REACH OF CHILDREN.