Robustel iGT06 - Manual (Page 21)

Robustel GoSafe iGT06 User Guide
RT_iGT06_UG_v01.00
07.12.2011 20 / 29
Confidential
Latitude After enable circle geofence, user should input the latitude for the radius. Null
Longitude After enable circle geofence, user should input the longitude for the radius. Null
Radius Input the radius size, unit is 100 meters Null
Latitude @
Location
Current latitude, read only parameters.
Vary to
different
location
Longitude @
Location
Current longitude, read only parameters.
Vary to
different
location
Note: Rectangular geofence and circle geofence is optional.
3.2.6 Advanced
Advanced settings for tracker.
Advanced
Item Description Default
Interval
Two GPS packet upload internal.
Input from 10 to 18000 seconds, 0 means disable upload GPS packet. 10
seconds
Monitor
after User could call the tracker phone number to start voice monitor via microphone.
Input from 5 to 18 seconds. 10
seconds
Upload
The tracker will upload GPS location information to the server for preset time after alarm
triggered. After this period, the tracker will wait for 10 minutes then enter into arm mode.
Input from 1 to 999 minutes.
20
minutes
Vibration The tracker will enter into alarm standby mode after detecting 3 times continuously 10