3 power on and connect with pc, Chapter 3. operate the modem, 1 m1000 pro v2 configurator overview – Robustel M1000 Pro V2 Quick Guide User Manual
Page 5: 2 starting modem configurator via serial interface
Robustel GoRugged M1000 Pro V2 Quick Guide
RT_QG_M1000 Pro V2_v.1.0.0
24.01.2014
5 / 6
2.3 Power On and Connect with PC
User can use the serial cable to connect the modem’s DB9 female connector to external controller / computer.
Chapter 3. Operate the Modem
3.1 M1000 Pro V2 Configurator Overview
M1000 Pro V2 Configurator is a PC-based configuration software tool for managing and configuring Robustel M1000
Pro V2 gateway. With a full graphics mode and Windows-based environment, even first time users will find it easy to
learn how to use this new software tool.
Note: M1000 Pro V2 Configurator can be used with Windows 2000/XP/Vista/7 32/64-bit operation systems.
3.2 Starting Modem Configurator via Serial interface
1.
Switch the modem to “Config Mode”, connect the RS-232 port of the modem to a host PC, then power on the
modem.
2.
Double click “Modem Configurator.exe” to start the software.