Chapter 2: description, Overview, External description – RKI Instruments 65-2641RK-04 User Manual
Page 8

3
65-2641RK-04 M2A Transmitter Operator’s Manual
Chapter 2: Description
Overview
This chapter describes the components of the M2A transmitter. The transmitter is a 4 - 20
mA type detector head. It consists of the hydrogen detector, calibration adapter/splash
guard, terminal PCB, the M2A junction box, and the detector junction box. The two
junction box configuration is intended for situations where the detector needs to be
installed at an inaccessible location. The detector junction box can be installed at the
inaccessible location and the M2A junction box can be installed in a more readily
accessible area.
External Description
This section describes the junction boxes and all external components of the M2A
transmitter.
Figure 1: M2A External Components
Magnetic
Wand
Terminal
Strip
3/4" NPT Conduit
Hub, Plugged
3/4" NPT Conduit Hub
M2
Junction
Box
Calibration Adapter/
Splash Guard
Detector
Junction Box
3/4" NPT
Conduit
Hub
Hydrogen
Detector
Mounting Slot (2x)
3/4" NPT
Conduit Hub
Window