RKI Instruments GX-86A - Manual (Page 28)

Model GX-86A Instruction Manual
RKI Instruments, Inc. Page 27
H
2
S and CO Span
1. Connect a H
2
S or CO calibration cylinder to the adapter.
2. From the calibration menu, scroll to “4.SET SPAN ,” or
“5.SET SPAN .” Press ON/OFF/ENTER to start the selected
calibration.
3. Adjust the calibration value following the procedure in Combusti-
bles Span, steps 2 - 6.
Note
The GX-86A will display up to 99 ppm H
2
S, but the limit of
linear response is 60 ppm, well above acceptable exposure
levels..
The GX-86A will display up to 499 ppm CO, but the limit
of linear response is 150 ppm, well above acceptable expo-
sure levels.
If any reading cannot be set to agree with the calibrating gas sample,
replace the sensor.