RF-Link VMI-1201 - Manual (Page 13)

12
Tap the icon to enable HD 720p recording, tap it again to
disable recording.
Recording is only possible when a micro SD card is
inserted into the camera.
The system supports micro SD cards with a maximum
capacity of 32GB.
3: An
video. New images will overwrite old images when the
card is full.
4: If motion detection is not activated, the camera will
record continuously.
5: To playback recorde d file
Place the micro SD card into an SD card adapter.
Connect the card adapter to a computer.
Use a media player such as VLC to playback the
recorded file.
6. Record:
Note 1:
2:
1GB memory card is able to record about 1 hour of
a. Smart iCAM supports voice detection and push message alert
functions. When the sound from the camera reaches the setting
level, the camera will send an alert message to your smartphone
or tablet, and the camera also can play a pre-recorded voice or
melody automatically.
b. Tapping the sensitivity level bar can adjust the sensitivity level or
disable the VOX function. With the level set to high, the camera
microphone will detect sounds that are lower in volume.
c. Tap the Voice Recorder icon to start recording a voice or melody
that can be played by the camera when VOX is triggered. Tap the
Stop icon to stop recording. Maximum recording time is 10
seconds. The Voice Recorder is only effective when a micro SD
card is inserted into the camera.
d. The interval between VOX checks is 1 minute.
7. Voice Detection (VOX):
progress, otherwise the recording will be damaged.
Do not remove the memory card while recording is still in