Beltronics 995 - Manual (Page 4)

Radar Antenna and Laser Lens
The rear panel of your V995 should have a
clear view of the road ahead. For best
performance, do not mount V995
directly behind windshield wipers
or tinted areas. Page 6
Alphanumeric Matrix Display
V995’s display will show Highway,
AutoScan, or City as its power-on indication.
If you prefer, you can choose other power-
on indications. Page 12-14
During an alert, the display will indicate
radar band, and a precise bar graph of signal
strength. Page 10
Note: In the Dark Mode the display will
not light during an alert. Page 9
Quick Reference Guide
To begin using your V995,
just follow these simple steps
1 Plug the small end of the power cord
into the side jack of the detector, and
plug the large end of the power cord
into your car’s lighter socket.
2 Mount your V995 on the windshield
using the supplied windshield mount.
3 Press the PWR button, located top left,
to turn the V995 on.
4 Press and hold the Volume/Mute
button to adjust the volume.
Please read the manual to fully understand
V995’s operation and features.
QuickMount Slot
Insert V995’s adjustable Windshield mount
into this slot. Page 7
QuickMount Button
Press the button, and slide the Windshield
mount into one of its four locking positions.
Page 7
City Button
Switches between AutoScan, City and
Highway, settings. In general, we
recommend AutoScan. Page 8
Power
Press the PWR button to turn the V995 on
or off.
Volume
Press and hold the Volume/Mute button to
adjust the alert volume level. Page 8
AutoMute
V995’s patented AutoMute automatically
reduces the volume level of the audio alert
after a brief period. Page 8. If you prefer,
you can turn AutoMute off. Page 8
Programming
V995 is ready to go, just plug it in and turn it
on. But you can also easily change 7 features
for your preferences. Page 12-16
4
Rear Laser Port
Receives laser signals from behind the
vehicle.
Earphone Jack
Accepts standard 3.5mm earphone.
Brightness Button
Press to adjust display brightness. There are
three brightness settings, plus Dark Mode.
In the Dark Mode, the power-on
indication will be changed to a “AD,” “HD,”
or “CD” (indicating AutoScan, Dark,
Highway Dark, or City Dark). In the Dark
Mode, V995’s meter will not display during
an alert, only the audio will alert you.
Page 9
Power Jack
Plug the power cord into this connector.
Pages 6
Mute Button
Briefly press this button (above the display)
to silence the audio for a specific alert. (The
audio will alert you to the next encounter.)
Page 8
5