Powertrax 9206053500 - Manual (Page 11)

18. Install a coupler into the lower
half of the case.
9
19.
Insert block onto the coupler.
Make sure the block’s paddle is
aligned with the paddle opening in
the synchro.
Paddle
20. In order to check the clearance
inside the differential case, tem-
porarily set the second coupler onto
the block, making sure the block’s
paddle fits into the opening in the
synchro, and place the gage ring
and cap onto the coupler as shown.
There should be a gap between the
two halves of the differential case.