Phoenix Audio Quattro3 USB and Telephone MT302 - Manual (Page 8)

SOFTWARE DIALER
The Q3 model 302 can also be dialed using a software dialer via your computer.
This software dialer can be found on our website
www.phnxaudio.com.
Model
303
304
305 Connection
Analog Audio, Smart Phones/Tablets
Daisy Chain Power Kit
SIP/IP Phone
For more connection options, you
can purchase different modules
separately to add on to your
Quattro3. To the right is a list of the
different interface modules that
can be installed in your Quattro3.
The Q3 model 302 comes with an internal battery. This allows you to use the unit
without plugging it into a wall socket or a computer. The charge level of your
battery is displayed on the bottom of the LCD screen. When the unit is connected
to a power source (USB or power outlet), the battery symbol will show that it is
charging until the battery reaches full capacity. When the Q3 is working off of the
battery and is not connected to any other power source, it will automatically go
into hibernation mode after 2 minutes. To dial a call, you must press the power
button to “wake” the unit from hibernation. If an incoming call occurs during
hibernation state, the Quattro3 will awaken automatically. When the unit is
connected to a power source it will not go into hibernation.
WORKING WITH THE BATTERY