BOXLIGHT MP-350m - Manual (Page 27)

20
U s i n g t h e P r o j e c t o r
To raise the projector:
1 Press and hold the elevator button (Figure 15).
2 Raise the projector to the height you want, then release the
button to lock the elevator foot into position.
3 If necessary, use the leveling knob (Figure 16) to adjust the
angle of the projected image.
F IGURE 17
Adjusting the height of the projector
To lower the projector:
1 Press the elevator button.
2 Lower the projector.
3 If necessary, use the leveling knob (Figure 16) to readjust the
angle of the projected image.