BOXLIGHT MP-350m - Manual (Page 17)

10
S e t t i n g u p t h e P r o j e c t o r
Connecting a Desktop Computer
1 Locate the cable that connects your monitor to your computer.
Unplug it from the computer.
2 Plug the end of the CablePro cable into the monitor con-
nector on your computer.
F IGURE 8
Connecting the CablePro cable to an IBM-compatible desktop computer
Do you want to display the image on your computer’s monitor as
well as on the projection screen?
NOTE: The projector must be
turned on to display the image on
your monitor.
1 Plug your monitor’s cable into the connector on the
CablePro.
Do you want to play your computer’s audio on the projector?
1 Unplug the audio cable, if present, from your computer.
2 Plug either end of the CablePro audio cable into the audio
connector on your computer.
3 Plug the other end of the audio cable into the connector
on the CablePro.