Phoenix Audio DRS-2 - Stereo Class A Microphone Pre-Amplifier/DI - Manual (Page 2)

DRS-2 Specifications
1U rack space unit: With 240V/110V mains voltage input selector switch
Class A (DSOP2) Output specs. Frequency response: 20Hz to 20kHz +- 0.5dB,
Maximum Output = +26dBu @ 1kHz, Noise = -90dB @ 20Hz to 20kHz.
Output connections: XLR's and TSR 1/4" Jack on rear
Phoenix Audio’s unique Class A, transformerless, True balanced Mic input stage.
Microphone inputs: XLR's on Front and Rear Panels
Individual Earth Lift: Push-button Switches
Gain Range (Mic input): -30 to -70 in 5dB steps With 10dB more available on the fader.
Gain reduction: -30dB pad push-button Mic/Line switch (Mic input)
High Input Impedance DI: Mono 1/4" Jack on front panel
Gain Meter: LED Metering. (Green = 0dB, Yellow = +8dB, corresponding to “4” and “6”
on a PPM Meter).
Phantom Power: Switchable phantom on Push-button Switch
High Pass Filter: on Push-button Switch
Phase Reverse: on Push-button Switch
Frequency Response Mic Input Stage: -0.4dB @ 40Hz, -0.3dB @ 25kHz
Frequency Response: DI Input Stage: -0.3dB @ 40Hz, - 0.5dB @ 25kHz
Typical Headroom: +24dB on Mic-Pre stage
DI Stage gain: Maximum of 20dB