Blaupunkt C30 - Manual (Page 8)

18
Volume adjustment
The system volume can be adjusted in
steps from 0 (off) to 66 (maximum).
➮
To increase the system volume,
turn the volume control
2
to the
right.
➮
To decrease the system volume,
turn the volume control
2
to the
left.
Setting the power-on volume
You can set the unit’s default power-on
volume.
➮
Keep pressing the MENU button
;
until “ON VOL” appears in the
display.
➮
Set the power-on volume using the
and buttons
:
.
If you set the power-on volume to 0:
every time you turn the unit on, the
power-on volume will be the same as
the volume level that was set before the
unit was last switched off.
Risk of serious injury.
If the power-on volume is set to maxi-
mum, the volume level can be very
high when the unit is switched on.
If the volume was set to maximum
before the unit was switched off and
the power-on volume is set to 0, the
volume level can be very high when
the unit is switched on again.
➮
Press the MENU button
;
.
Mute setting
This feature allows you to instantane-
ously reduce the system volume (mute).
➮
Press button
3
.
Switching on/off
There are various ways of switching the
unit on/off.
●
Switching on/off using the vehicle
ignition.
If the unit is correctly connected to the
vehicle’s ignition, it will switch on/off si-
multaneously with the ignition.
You can also switch the unit on even if
the ignition is off.
➮
To do so, press button
3
until the
unit turns on.
Note:
To protect the vehicle battery, the unit
will switch off automatically after one
hour.
●
Switching on/off using button
3
.
➮
To switch the unit on press button
3
.
➮
To switch the unit off press button
3
for longer than two seconds.
VOLUME ADJUSTMENT SWITCHING ON/OFF