Orbit Baby Toddler Stroller Seat - Manual (Page 9)

16
16
Str
olling with Y
our Child
Str
olling with Y
our Child
17
17
1. Position the Safety Harness to just
below, or level with, your child’s
shoulders. For the lower position,
pass the Shoulder Strap under the
loop. (Photo J)
2. If using the Upholstery Pad, pass
the Shoulder Strap through the
matching slot. (Photo K) Clip the
ends of the Shoulder Strap to the
corresponding Lap Strap.
3. Position the straps around your
child and CLICK both Lap Straps
into the Crotch Clip. (Photo L)
4. CHECK the security of the Safety
Harness by tugging to make sure
the Clips do not come disengaged.
Using the Restraint Harness
!
WARNING
!
Death or Serious Injury
can occur
Always restrain your child with the
Safety Harness when using the Seat.
Only rotate the Toddler Stroller
Seat when stationary.
Always fully support the Stroller
Seat by fi rmly grasping it with both
hands.
Always make sure that the Stroller
Seat is locked in forward or rear-
facing position before moving.
Side-facing positions are for
stationary use only.
1. Pull both Release Levers. (Photo M)
2. Rotate the Stroller Seat and stop
pulling the Release Levers. The
Stroller Seat will lock into the next
rotational stop position. (Photo N)
Rotating the Toddler Stroller
Seat
!
WARNING
!
Death or Serious Injury
can occur
J M
N K
L