Orbit Baby Toddler Stroller Seat - Manual (Page 7)

Str
olling with Y
our Child
12
12
Install the Base
Str
olling with Y
our Child
13
13
Docking & Undocking the Toddler Stroller Seat 12
Unfolding & Folding the Toddler Stroller Seat 14
Using the Restraint Harness 16
Rotating the Toddler Stroller Seat 17
Attaching and Using the Support Bar 18
Reclining the Toddler Stroller Seat 20
Using the Sunshade and Sunshade Extension 21
Avoid pinch hazards: Ensure that fi ngers and appendages are
clear of the SmartHub area.
Never undock the Stroller Seat while a child is seated in it.
Never rotate the Stroller Seat while it is in motion. Make sure the
Orbit Product that the Stroller Seat is docked into is locked in place
and stable.
!
WARNING
!
Improper handling of the Toddler Stroller Seat
increases the risk of serious injury and death
1. Make sure the Orbit product you
are docking the Stroller Seat into is
stable and locked in place.
2. Grab the sides of the Stroller Seat
and make sure that nothing is
obstructing the Hub area (Photo A).
3. Press the Stroller Seat fi rmly onto
the SmartHub until you feel and
hear a CLICK. (Photo B)
4. CHECK the security of the docking
by pulling up on the Stroller Seat, it
should not move.
5. Rotate the Stroller Seat into one of
its four rotational locking positions.
To Undock and Remove the Seat:
1. Lift the Stroller Seat while holding
both Release Levers squeezed.
(Photo C)
Docking & Undocking the
Toddler Stroller Seat
C
A
B